Tubes: All Sizes/Types

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- Polyurethane tube - Twice as strong as a regular butyl tube - Super lightweight - Very compact - Wheel Diameter: 29'' - Tube Width: 2.20-2.60 - Valve Length: 40mm - Valve: Presta - Tube Weight: 100g - Shaft Type: Threaded - Thorn resistant: No

- 0.8mm walls (0.9mm walls for 16", 20", 24" sizes) - Puncture resistant

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

- Size: 18 x 1-3/8 - ISO Diameter: 400/18" - ISO Width (mm): 35mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 98g

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. Special quality control that prevents unpleasant surprises. - 40mm valve length

- High-quality, ultra-low weight tubes that retain air just as well as conventional butyl tubes - Possesses the same resistance to punctures

- High-quality, ultra-low weight tubes that retain air just as well as conventional butyl tubes - Possesses the same resistance to punctures

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smoothly, ride after ride. - Individually cured for consistent tube thickness = the utmost in quality.

- Labeled Size: 12-1/2 x 1.75 – 2.125 - ISO Width: 47mm – 62mm - ISO Diameter: 203 / 12.5" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- Low Lead Valve - ISO Diameter: 203 / 12.5 - ISO Width (mm): 57mm - Labeled Size: 12 x 2-1/4 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth

- Low Lead Valve - ISO Diameter: 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width (mm): 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 94g

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 450g (1.5 – 1.75), 475g (1.75 – 2.125)

- Low Lead Valve - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 507 / 24" BMX - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Labeled Size: 24 x 1.9-2.125 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 600g

- Size: 29 x 1.9 – 2.3 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 48mm, 49mm, 50mm, 51mm, 52mm, 53mm, 54mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 176g (32mm), 178g (48mm)

- Size: 16 x 1.75 – 2.125 - ISO Width: 47mm – 57mm - ISO Diameter: 305 / 16" - Shaft Type: Smooth - Flat Protection: Thorn Resistant - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth

- ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Labeled Size: 27.5 x 52/58 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

- Size: 700c x 23 – 25 - ISO Diameter: 622 / road / 29" - ISO Width: 23mm, 24mm, 25mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 92g (32mm), 94g (48mm), 96g (60mm), 98g (80mm)

- Size: 700c x 35 – 43 - ISO Diameter: 622 / road / 29" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 122g (32mm), 124g (48mm), 126g (60mm)

- Size: 26 x 1-3/8 - ISO Diameter: 584 / 650b / 27.5" , 590 / 26 x 1 3/8" - ISO Width: 37mm - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 136g

- Size: 26 x 2.4 – 2.75 - ISO Diameter: 559 / 26" mtn - ISO Width: 60mm, 61mm, 62mm, 63mm, 64mm, 65mm, 66mm, 67mm, 68mm, 69mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 283g

- 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 452g (1.5-1.75), 642g (1.9-2.125)

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded