Searching...

 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Price

–   GO

Size

+ more sizes
VisaMasterCardAmerican ExpressDiscoverPayPal
 
> Bicycling Catalog > Wheels

Wheels

36 Results
Per Page 30 60
1 2 Next
Product Rating
 
5.0 stars
 (11 Reviews)
CycleOps Trainer Skewer
$12.99

CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine. [more]

Delta Axlerodz Bolt-On Skewers
$14.99

- Extra security against theft - 5mm hex CrMo axle [more]

Kurt Kinetic Trainers Skewer
$12.99

Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width [more]

Mavic 20mm Front Axle Adapter - Crossmax ST/SX
$16.90

On today's MTB forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic Crossmax ST/SX front hub to use 20mm axle -… [more]

Mavic 12mm Front Road Axle Adapters
$19.95

On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Adapts Mavic road wheels to use 12mm front axle - One pair… [more]

Mavic 15mm Front Road Axle Adapters
$19.95

On today's road forks, there are multiple front axle standards. Mavic front axle adapters allow you to mix and match without replacing wheels/forks. Most Mavic wheels can be fitted with specific adapters to match your fork end dimensions. - Converts Mavic road hubs to use 15mm axles - One pair… [more]

Mavic Rear Axle Adapter - Quick Release
$19.95

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Mavic mountain hubs to quick release - One pair is required for each hub to be converted [more]

Mavic Rear Axle Adapter 12/142 (Center Lock)
$19.95

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts MTB rear hubs with Center Lock rotor mount to use 12mm axle with 142mm spacing - One pair of adapters required for… [more]

Mavic Rear Axle Adapter 12/142 for 157mm-spaced Deemax
$19.95

On today's MTB frames, there are many dropout diameter and width standards. Most Mavic wheels can be fitted with specific adapters to match your wheelset with your frame. - Converts Deemax rear hubs with 157mm spacing to use 12mm axle with 142mm spacing - One pair of adapters required for each hub… [more]

Odyssey Graduate PC Peg
$18.99

Odyssey's newest peg! The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5? (length) x 1.5? (outer diameter) - 4.5 oz (9 oz for a pair) [more]

Odyssey HGS Spokes
$19.99

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX. [more]

SRAM DualDrive Clickbox
$10.00

SRAM's DualDrive is a unique drivetrain that combines a three-speed internal-gear hub with an external cassette and derailleur. The result is a wide-range of gears in a clean, one handed control system. SRAM's DualDrive Clickbox attaches to the DualDrive hub—and the DualDrive shifter via cable—so… [more]

SRAM Rise 60 Conversion Caps
$15.00 - $21.00

SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type. [more]

SRAM X0 Hub Conversion Caps
$16.00 - $21.00

SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type. [more]

Spank Fratelli Tubeless Tape
$11.90

- Ultralight tubeless sealant tape converts many non-tubeless rims/Wheels to tubeless-ready by sealing spoke holes - Recommended for Spank's EVO models (not for Spoon or Tweet models) - Spank's Oohbah bulge feature often allows inflation with only a hand pump - Enough to tape one wheelset, up to… [more]

Spank Spoon 20 Front Hub QR Adaptor
$18.00

QR adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±26 Compatibility: SPOON… [more]

Stan's NoTubes 3.30/3.30Ti Hub Kit
$15.00 - $20.00

Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm. [more]

Stan's NoTubes Rim Tape
$15.99 - $19.99

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha… [more]

Stan's NoTubes Tubeless Valve Stems
$16.00

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0… [more]

WTB TCS Rim Tape
$12.95 - $71.95

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims). [more]

WTB TCS Brass 34mm Valve Stems
$13.95

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. [more]

WTB TCS Brass 46mm Valve Stems
$15.99

WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. [more]

Wheels Manufacturing Inc. Axle-17
$11.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Hollow Axle -… [more]

Wheels Manufacturing Inc. Axle-13
$13.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x… [more]

Wheels Manufacturing Inc. Axle-19
$13.00

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x… [more]

Wheels Manufacturing Inc. Axle-01
$14.94

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 126mm spacing - Type:… [more]

Wheels Manufacturing Inc. Axle-10 Axle
$15.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle -… [more]

Wheels Manufacturing Inc. Axle-33
$15.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi -… [more]

Wheels Manufacturing Inc. Axle-34
$15.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi -… [more]

Wheels Manufacturing Inc. Axle-06
$16.99

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs - Type: Solid Axle -… [more]

36 Results
Per Page 30 60
1 2 Next
 
Join Our Email List
Email: