Write a Review

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

True competitors are always looking for a performance advantage - a relentless pursuit of equipment that is lighter, stiffer, stronger, and more durable. To create the best drivetrain possible, we re-examined and re-engineered our crankset design. Our all-new XX1 Eagle CARBON TUNED crankset is our lightest, stiffest, and strongest to date. DUB technology enhances this by simplifying the relationship of the spindle to the bottom bracket and redefining the measure of durability. DUB-powered cranksets mean simplicity, compatibility, and durability. - Chainrings not included

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

Red BB30 Crankset by SRAM

- Single-ring drivetrain simplifies functionality and reduces weight - Direct mount chainring - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB bottom bracket adds durability, simplicity and broad compatibility - Can be upgraded to a power meter

For maximum pedaling efficiency, Shimano's 105 Crankset boasts light, stiff hollow cold forged aluminum arms, plus an integrated oversize-steel axle. The chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting. The asymmetrical, four-armed big chainring provides incredible power transfer.

Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - Hollow Exogram carbon arms - BB/Spider/Chainrings not included

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included

The wider stance of the arms and chainrings provides clearance for extra wide tires, giving you the option to explore new, more challenging routes. - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - DUB bottom bracket adds durability and simplicity - Longer DUB crank spindle accommodates both Road- and MTB-width bottom bracket standards for unmatched cross-compatibility across brands - Requires wide front derailleur - BB not included

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

The SRAM Force AXS Crank Arm Assembly features carbon crank arms that are ready to pair with any SRAM AXS spider or integrated chainring, with or without power. - 8-bolt interface is compatible with power and non-power AXS spiders and integrated chainrings - Not compatible with SRAM's 3-bolt direct mount interface - Carbon fiber arms with natural carbon finish - Spider and chainrings sold separately - DUB spindle interface - Compatible with all SRAM Road DUB bottom brackets - Number of Chainrings: No Rings, No Spider Included - Crank Intended Use: Road - Pedal Spindle: 9/16" - Spindle Interface Type: SRAM DUB - Chainring BCD: Direct Mount SRAM - BB Included: No

SRAM's Apex Crankset is designed for capable stiffness at an impressive weight. The cold-forged aluminum arms are tough, rigid and perfectly complement your favorite ride. SRAM's long-lasting Powerglide chainrings are hard anodized and designed for quick, positive shifting in all conditions. Plus, the Apex crankset comes with SRAM's smooth-spinning GXP bottom bracket.

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

We’ve fit the same outstanding stiffness, durability and weight savings of the eeWings mountain cranks into the slimmer road bottom bracket standard. This includes road, gravel and cyclocross configurations. - eeWings All Road 170mm, 172.5mm or 175mm - 30mm Spindle - 10 Year Warranty"

Explore the most challenging routes on the newest crop of versatile and fun drop-bar bikes with the SRAM Force 43/30T wide crankset. Shifting is smooth, accurate, and dependable using our proven X-Range gearing based around a tight, 13T difference between the small and big chainrings. The wider stance of the chainrings expands 2x drivetrain bike capabilities by providing clearance for fatter tires. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - Wide chainline crankset for bikes with up to 700c x 45 or 27.5 x 2.1" tire widths (43/30 chainrings only) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Requires Force Wide front derailleur - DUB bottom bracket adds durability and simplicity

Shimano Tourney FC-A073 crankset - 7/8-Speed compatible - SG-X Steel chainrings - Square taper JIS - Fixing bolts not included - Chainguard model

FSA BROSE eBike replacement crankarms.

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The X0 Eagle E-MTB crankset is all the durability you expect from X0 optimized for E-MTB. The eye-catching all-aluminum design utilizes a perfectly balanced stiffness-to-weight ratio. The X0 Eagle E-MTB Crankset and X0 Eagle Transmission (T-Type) direct mount chainring delivers premier shifting performance, reliable strength, and optional bolt-on guards to protect your ring in the roughest terrain. - All aluminum construction - Optimized stiffness to weight ratio

Replacement crank arm for GX Eagle GXP

- XT M8100 12 speed crankset - Fits Boost and non-Boost MTB - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type - Chainline : 52mm

The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately

Forget front derailleurs; SRAM's Rival 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. It combines the durability, simplicity, and efficiency SRAM is know for on the road with their 1x mountain technology, X-Sync. - Single-ring drivetrain simplifies functionality - Forged aluminum with detachable spider: 42T and 52T X-Sync tall, square tooth design provides maximum control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Weight: 799g (24mm spindle, 172.5mm, 42T, no BB)

The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13

The RaceFace Aeffect R crankset offers enduro-rated strength in a lightweight XC-style package, making it a solid and dependable crankset choice. - Its forged 7050 AL construction optimizes stiffness without added weight - The Aeffect R features the versatile CINCH system for plenty of interchangeable spider options - Can run alloy or steel CINCH direct mount chainrings - Boost-compatible 24mm EXI interface spindle - Direct mount chainline: 51mm / 57.5mm (Flipped Ring) - 2X Cinch spider chainline: 49.5mm - Boost 2X Cinch spider chainline: 52.5mm - Number of Chainrings: No Rings, No Spider Included - Chainline/Hub Compatibility: 135/142 MTB Hubs, 141/148 Boost Hubs, 150/157 DH Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No - Chainring Included: No

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10